The RazorKnow Organisation

Clean air, healthy living and a long life are just some of the chief concerns of humans worldwide. Especially in our cities, the effects of industrialization, increased vehicular traffic and general climatic conditions have made finding clean air an almost impossible task.

Air conditioners have proven useful, but only to the extent of keeping the temperature around us comfortable. They have been unable to enhance the basic quality of the air we breather. Governmental agencies like the Environment Protection Agency have officially declared that poor indoor air quality is the number one cause of increasing numbers of asthma sufferers. Nearly one third of all Americans suffer from asthma or allergic diseases, the causes of which can be directly attributed to the above mentioned poor air quality.

But do we have any control over the air we breathe? Do we have the wherewithal to remove the pollution, dust and irritants in the air to make it fresh and wholesome again? Of course we do! With the technology that has come to be known and adopted in every home. With a technology called an air purifier. Most American homes have started using air purifiers to control and regulate the quality of indoor air and the results are already showing in the increased health and vitality of most families.

Air purifiers have been a discovery that has put the freshness back into our lungs and once again, given us the option of breathing in clean, healthy air. There are hundreds of air purifiers available in the market. They work on a wide range of air purification techniques and processes, but they all have one objective in mind - that of removing several kinds of pollutants, allergants and irritants!

This was the first thing I looked for when I bought my air purifier as I wanted to use it to keep my house free of these in addition to purifying the air. But I had a rather difficult time choosing the right air purifier as there are specific air purifiers for various elements like dust, pollen, animal shedding, tobacco smoke and even mold and mildew. I wanted an air purifier comprehensively germs, pollution and other general conditions while giving me clean and wholesome air.

Fortunately, most technologies used in air purifiers like carbon filters, HEPA, ionic lamp and ozone filter, do this. They comprehensively remove most contaminants in the indoor air in houses and living areas. But probably more important for a prospective buyer, are details like the area in which an air purifier will be used, the efficiency of the air purification filter, the noise level (yes! Studies reveal that this is a major concern among users!) and warranty and replacement details.

The size of the area where the ir purifier is likely to be used is of especial importance because using a small volume air purifier in a large room could not only decrease the efficiency of the air purifier, but also result in over burdening the filtration system, thereby casing excessive production of nitrogen oxide (especially in ozone filter air purifiers) which can prove harmful for human consumption. When you do therefore go in for an air purifier, do keep these details in mind.

Along with air purifiers and other equipment comes the need for internal cleansing and nourishing. We like these nutritional supplements with high electrical vibration: Electrical Body Products

Whenever you enter a library you are transfixed by the extended bookcases that are home to a powerhouse of information- literature! volumes are safe and free from dirt and junk in a bookcase. A standard bookshelf has level shelves to hold publications. Outside glass doors are a good option to refer and store books neatly.

Tell me about a barrister bookcase.

attorneys have to read from various reference manuals for their practice.These volumes are expensive too and required to be kept reachable for a quick reference. Barristers bookcases are rugged and hold great usefulness for a lawyer.They are also known as lawyers bookcases and can be produced in oak wood, cherry wood in various finishes and colorings.

How did individuals store books when barrister bookcases did not exist?

Books were rare in the past, and thence there was no need for a bookcase then. Books utilised to be codified by hand in the past. rich individuals who owned them stored them in convenient containers. The reason behind this was the books were dear and could be bought by the affluent class only. Such boxes fulfilled the want for a bookcase.

After a while, these hand-handwritten books were seen in many well-off peoples homes. Thus the books had to be placed within a wardrobe. these closets gave rise to strong bookshelves found Now.

So what way were these books kept in the case?

The books were arranged in a traditional way. The books would be located on their sides or with the edge on the forefront. these books had a band built from leather or parchment as a cover that mentioned the title too.This band was located on the front edge and thus the books were arranged with their bounds facing out.

After publishing engineering was invented, books were easily accessible to the common man due to the decreased prices. Because the titles could be published behind the book, the edges were not facing outward any more.

Which materials were primarily utilized?

These barrister bookcases used to consist of oak commonly. Other than that, maple, cherry and pine wood were also utilized for creating a barrister bookcase.Bespoke barrister bookcases can be produced in steel too for reducing wood cost and enduringness.Some of the oldest bookcases are in England in the Bodleian Library at Oxford University. they were kept in the library in the sixteenth century.

The two major bookcase designers were Chippendale and Sheraton who made terrific bookcases glazed with little pills wrapped in lattice frames. Any room could look dressed with these bookcases.

How are the latest bookcases peculiar?

It is genuinely impressive to know about the journey of how a humble bookshelf has grown up to being a barrister bookcase over a period of time!

There’s an old saying that goes, “Never trust a used car salesman”. The same can probably be said about anybody who sells anything that has been previously owned. Let’s face it, most owners don’t really take care of their toys and if they’ve given them up or chucked them in the trash then most likely they know they haven’t. That’s why if you’re thinking of buying a saw used, there are some things you better look out for. Hopefully what follows will arm you for the war ahead.

Old saws are actually a very common item at most flea markets and many garage sales. Also, you can usually get a very good deal on a used saw at any used tool dealer. Your safest bet, however, is to try to get your old saw from an antique tool dealer. If you tell the dealer that you are looking for a user grade saw, meaning one that only needs some cleaning and sharpening, he will be able to find something for you that you’ll be pleased with. If you resort to the flea market or garage sale variety, you run the risk of picking up a saw with enough flaws to make it difficult to restore to working condition. So while the prices at the antique dealer will be higher, in the long run it will be worth it.

When checking out the saw you intend to buy, there are a number of things that you should look out for.

The first thing to check is the handle. The handle should be in sound condition and in one piece. If there are small cracks, that’s okay as long as they are able to be glued. Try to avoid saws with cracks in the grip part of the handle. Also, check the area around the saw nuts as there are usually cracks there. If the handle has small pieces above or below the horn part of the handle missing that’s okay. This won’t affect the usefulness of the saw. Also, make sure the handle feels comfortable in your hand. It should be large enough to hold securely. There is usually a hole in the grip for your finger to rest in. Make sure your finger fits comfortably in the hole and isn’t too tight.

Next is the blade. Make sure you check the blade for stress cracks at the teeth. Usually these are very hard to detect without some kind of visual help like a magnifying glass. But if you apply pressure with your finger behind the teeth, the crack will become visible enough for you to see it. Check all the teeth of the saw to see if any of the teeth are missing. If there are teeth missing, this could be the indication of a brittle blade.

Next you want to check for rust. Some light rust on the surface of old saws is pretty much unavoidable, especially if they have been in storage for years. But if a saw is badly rusted, then it is to be totally avoided. Most likely this saw won’t last very long.

Finally, you want to check the blade to make sure it is straight. It should have no kinks or bends. If the blade is kinked then the saw will be unusable. Once a blade is bent, it is very hard to get straight.

By following the above tips, you are sure to bring home and old saw that will be useful and last you for many years.

——————————————————-
Michael Russell
Your Independent guide to Tools
——————————————————-

There are many different ways to enjoy a sauna bath, regardless of whether the setting of that sauna bath is in a traditional hot Finnish sauna room or a modern, state-of-the-art far infrared sauna cabin. And, as so many veteran sauna enthusiasts discovered soon after they first began taking sauna baths, it doesn’t take long for a novice sauna bather to learn how to ensure that his or her every session in the sauna is a safe, pleasurable experience. Here are just a few tips to help you reap the greatest rewards in your sauna:

1. Sauna bathing is not recommended for people with high blood pressure, cardiovascular disorders or pulmonary diseases, and anyone who is pregnant or has multiple sclerosis, hyperthyroidism, hypertension should consult a qualified health professional before using a sauna. If you have any other health concerns, a talk with your doctor may help to put any worries regarding your use of a sauna to rest.

2. Do not use the sauna while under the influence of any type of alcohol, drugs, anticoagulants, antihistamines, vasoconstrictors, vasodilators, stimulants, hypnotics, narcotics or tranquilizers.

3. Avoid eating heavily before you take your sauna bath. If you do eat beforehand, wait at least an hour before beginning your sauna session.

4. Remove all metal objects, such as watches and eyeglasses, and jewelry from your body prior to entering the sauna.

5. Do not wear contact lenses in the sauna.

6. Take a shower before entering the sauna, and be sure to dry your body completely after you wash yourself.

7. Drink some mineralized water before your sauna.

8. Bring at least two towels, one for sitting or lying on and wrapping in and another for drying off afterwards. Don’t try to dry a clean body with a towel soaked in sweat.

9. Sauna etiquette and sauna customs can vary greatly from country to country, especially regarding what to wear in the sauna and whether men and women can bathe in the same sauna at the same time. If you are visiting a public sauna, be aware of what the applicable rules, customs and protocols are. If you are bathing alone in your own home sauna, though, feel free to wear whatever will make you most comfortable, be it a swimsuit, a towel, or nothing at all.

10. Allow yourself a reasonable amount of time for your sauna session. The sauna is no place for anyone in a rush. For many sauna enthusiasts, a typical sauna sequence consists of: a warm shower; 15 minutes in the sauna heat; a cool shower and optional dip in a swimming pool, lake or pond, and then a 10 to 30 minute rest. Most sauna fans repeat this sequence, or one similar to it, many times during a morning, afternoon or evening. People with heart problems or high blood pressure, however, are advised to avoid swimming in cold water after their sweat bath.

11. Don’t smoke in the sauna. Also, if you are bathing in a sauna with other people, realize that the sauna door should not be kept open so long that it cools the sauna for those sharing it with you. In a traditional Finnish sauna, courtesy also dictates that you be considerate of others when you’re tossing water on the sauna rocks.

12. It goes without saying that a sauna bather would be unwise to engage in sexual activity amid the intense heat of the bath. Also, to do it in front of other bathers might be viewed by some as being very rude.

13. Leave the sauna immediately if you feel faint or dizzy. One of the most important principles to follow when you are in the sauna is to listen to the messages your body sends you. A sauna bath should never be considered as a test of your endurance, so respect your body and its limitations.

14. To prevent dehydration, be sure to replenish your fluids after you come out of the sauna. Drinking mineralized water is recommended, although some sauna enthusiasts believe a beer can be quite refreshing. Just don’t drink any alcohol while you’re in the sauna itself - only afterwards if you wish and, even then, not to excess.

15. Get dressed only after your body temperature has returned to normal and you have stopped sweating.

Follow these basic guidelines for a safe, satisfying and soothing soak in the sauna, and you’ll be a veteran sauna enthusiast before you know it.

Pertti Olavi Jalasjaa is the Finnish-born author of “The Art of Sauna Building,” an acclaimed reference book on sauna construction. He is also the general manager of Great Saunas, which has been manufacturing and selling high-quality saunas and sauna kits to sauna enthusiasts around the world since 1974. Visit Great Saunas online at http://www.greatsaunas.com.

Is it possible to build an active aerial minefield to protect our troops and in-country logistical supply lines? The answer is probably yes. The Germans attempted to use hot air balloons with charges on them. It did not work. However today we have many newer technologies that if put together it might be possible to actually build an active aerial mine field. For instance what about a “Metal Storm” with lightweight munitions inside hanging from Balloons.

http://www.metalstorm.com/04_the_technology.html

Any approaching threat would be met with an overwhelming response. The balloons would be reflective for safety against laser attack and be deadly against aircraft, UAVs or missile airspace intrusions? Just a thought?

Having an aerial barrier between our enemy and our assets, troops or allies is omnipotent, yet few modern warfare techniques are able to do this. Recently a small UAV from Hezbolla was able to avoid Israeli defenses and flew around for hours and then returned. We must have proper defenses in place if we are to have human beings on the battlefield who are vulnerable to attack. Previous efforts for 100% security have failed in defense of regional areas, yet the weaponry is getting better and the offensive side of the game much stronger and getting stronger each and every year.

“Lance Winslow” - Online Think Tank forum board. If you have innovative thoughts and unique perspectives, come think with Lance; www.WorldThinkTank.net/wttbbs/